Figure 57: Template Operations Directive; Select Os Name Section; Select Devices Section; Select Template Section - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
218
NOTE: The Template Operations directive only updates the configuration
database. To apply changes to devices, you must use the Update Device
directive.

Figure 57: Template Operations Directive

The Template Operations directive displays a dialog box that is divided into the following
sections:

Select OS Name Section

Select a device family from the Select OS Name list to determine which set of templates
and devices to show.

Select Devices Section

In this section, select one or more devices for template operations.

Select Template Section

Select one or more templates to apply to the selected devices. Use the edit button to
open the Select Templates dialog box. Check one or more check boxes to select
templates.
Copyright © 2010, Juniper Networks, Inc.