Interface Types And Specifiers; Chapter 1 Command Reference Topics; Table 3: Interface Types And Specifiers For Erx7Xx Models, Erx14Xx Models - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

Software for e series broadband services routers command reference a to m
Table of Contents

Advertisement

ip route 10.10.0.166 255.255.255.255 192.168.1.1
ip debounce-time 0
router rip
Related Topics

Interface Types and Specifiers

Many commands take the variables interfaceType and interfaceSpecifier. Some
commands support all types of interfaces, whereas other commands support only
certain types of interfaces. Similarly, some commands support all interface specifier
formats for a particular interface type, whereas other commands support only certain
interface specifier formats.
Table 3 on page 5 lists the interface specifiers for each type of interface on ERX7xx
models, ERX14xx models, and the Juniper Networks ERX310 Broadband Services
Router.
NOTE: On ERX7xx models, ERX14xx models, and the ERX310 router, you can use
the atm slot/port/vpi/vci interface specifier format as an alternative to the atm
slot/port.subinterface format with the specific show interface and show subinterface
commands to monitor all ATM 1483 subinterfaces (except NBMA interfaces) as well
as the upper-layer interfaces configured over an ATM 1483 subinterface. You cannot,
however, use the atm slot/port/vpi/vci format to create or modify an ATM 1483
subinterface.
Table 4 on page 13 lists the interface specifiers for each type of interface on the
Juniper Networks E120 and E320 Broadband Services Routers.
NOTE: On the E120 router and the E320 router you can use the atm
slot/adapter/port/vpi/vci interface specifier format as an alternative to the atm
slot/adapter/port.subinterface format with the specific show interface and show
subinterface commands to monitor all ATM 1483 subinterfaces (except NBMA
interfaces) as well as the upper-layer interfaces configured over an ATM 1483
subinterface. You cannot, however, use the atm slot/adapter/port/vpi/vci format to
create or modify an ATM 1483 subinterface.
Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and
ERX310 Router
For a list of regular expressions, see Using Regular Expressions in the JUNOSe IP
Services Configuration Guide
Interface Type
Description
atm
ATM
interface or
ATM 1483
subinterface
Chapter 1: Command Reference Topics
Interface Specifier
Refer to the individual formats listed below.
Interface Types and Specifiers
Example
5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Junose 11.0

Table of Contents