Baseline Ip Rip - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

Chapter 3: B Commands

baseline ip rip

baseline ip rip
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets a statistics baseline for RIP interfaces. The router implements the baseline by
Description
reading and storing the statistics at the time the baseline is set and then subtracting
this baseline whenever baseline-relative statistics are retrieved. There is no no version.
Privileged Exec
Mode
241
baseline ip rip