Tracing Operations Of The Pppd Process - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

To configure PPP packet monitoring, include the
[edit protocols ppp]
When monitoring is configured, the operational mode commands
and

Tracing Operations of the pppd Process

To trace the operations of the router s pppd process, include the
statement at the
To specify more than one tracing operation, include multiple
You can specify the following flags in the
hierarchy level:
[edit protocols ppp]
monitor-session (interface-name | all);
show ppp interface display a
[edit protocols ppp]
[edit protocols ppp]
traceoptions {
file filename <files number> <match regular-expression> <size size> <world-readable |
no-world-readable>;
flag flag;
level severity-level;
no-remote-trace;
}
access —Access code
—Address pool code
address-pool
all —All areas of code
—Authentication code
auth
—Challenge Handshake Authentication Protocol (CHAP) code
chap
config —Configuration code
—Interface database code
ifdb
lcp —LCP state machine code
—Memory management code
memory
message —Message processing code
—NCP state machine code
ncp
—Password Authentication Protocol (PAP) code
pap
ppp —PPP protocol processing code
—RADIUS processing code
radius
rtsock —Routing socket code
—Session management code
session
signal —Signal handling code
Chapter 3: Configuring Physical Interface Properties
monitor-session
Monitored flag in the Session flags
hierarchy level:
statement:
traceoptions
Tracing Operations of the pppd Process
statement at the
show ppp summary
column or line.
traceoptions
flag statements.
131