Table 19: Type 1 Pic Mode Combinations; Table 20: Type 2 Pic Mode Combinations - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

bandwidth of the interface is in a single channel. In nonconcatenated mode, the PIC
operates in channelized (multiplexed) mode.
Table 19 on page 137 shows the mode combinations for the next-generation
SONET/SDH Type 1 PICs with SFP.

Table 19: Type 1 PIC Mode Combinations

PIC Mode
2-port OC3 2xOC3 concatenated
4-port OC3 1xOC12 concatenated
1xOC12 nonconcatenated
4xOC3 concatenated
1-port OC12 1xOC12 concatenated
1xOC12 nonconcatenated
1xOC3 concatenated
Table 20 on page 137 shows the mode combinations for the next-generation
SONET/SDH Type 2 PICs with SFP.

Table 20: Type 2 PIC Mode Combinations

PIC Mode
1-port OC48, IQ 1xOC48 concatenated
and IQE
1xOC48 nonconcatenated
1xOC12 concatenated
1xOC12 nonconcatenated
1xOC3 concatenated
4-port OC12, IQ 1xOC48 concatenated
and IQE
1xOC48 nonconcatenated
1xOC12 nonconcatenated
4xOC12 concatenated
Chapter 3: Configuring Physical Interface Properties
Speed Configuration
fpc/pic/0 speed oc3
fpc/pic/0 speed oc12
fpc/pic/0:0 speed oc3
fpc/pic/port speed oc3
fpc/pic/0 speed oc12
fpc/pic/0:0 speed oc3
fpc/pic/0 speed oc3
Speed Configuration
fpc/pic/0 speed oc48
fpc/pic/0:0 speed oc12
fpc/pic/0 speed oc12
fpc/pic/0 0 speed oc3
fpc/pic/0 speed oc3
fpc/pic/0 speed oc48
fpc/pic/0:0 speed oc12
fpc/pic/0 speed oc3
fpc/pic/port speed oc3|oc12
Default Mode
concatenated
—
nonconcatenated
concatenated
concatenated
nonconcatenated
—
Default Mode
concatenated
nonconcatenated
—
—
—
—
nonconcatenated
—
concatenated
Configuring the Interface Speed
137