If you enable RTSP streaming of a calling station, the following screen appears:
Figure 780: enabled RTSP streaming of a calling station
As written above, the "IP address" field automatically reports the first available IP address: this can be
modified with another value which in this case, however, must be included in the range set in
Figure 778
(and must not already be been used).
The above works even if in
Figure 776
the IPerCom devices have static addressing.
MT124-032M
655
Need help?
Do you have a question about the IPerCom 3.1.0 and is the answer not in the manual?
Questions and answers