urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 182

To do this it is necessary to press the "Erase configuration on all devices" button:
The following pop-up window is displayed:
Deleting the configuration will reboot the devices. Those equipped with display start with the screen
that contains, among other things, the information ''Not configured'.
Press the "OK" button to delete the configuration from all the devices in the system to bring them back to
factory settings and create automatically a backup file of the previous configuration.
At the end of the procedure, IPerCom Installer Tools shows the following pop-up window:
182
Figure 188: "Maintenance" tab - deleting the configuration
Figure 189: request to delete the configuration from the system devices
Figure 190: configuration deletion successfully performed
MT124-032N