urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 342

The following table helps you to understand the meaning of the fields
Surname or
Company Name
Name/Other
information
Telephone
number
Description
Key codes
Door Code
Suspended
Visible
The number of digits of the Door Code can be changed from a minimum of 4 digits to a maximum of
8. For further details, see paragraph
The door opener code, besides being unique in the system, cannot be the same as other codes
already generated and increased by one unit. In fact, these codes are reserved for the coercion
alarm generation (in addition to the entrance hall opening). For further details see the installation
and user manual of the Switchboard downloadable from www.urmet.com
Door opener codes and related coercion alarm codes can be entered on call stations equipped with
numeric keypad, i.e. Call Module 1060/12-13-17-18-23 and Modular Entry Panel with 1060/48.
As for the key code, this is shown on one of the 2 sides of the proximity key. The code must be entered in
the relevant field of the configurator.
342
Surname of the resident or company name. Maximum length: 32
characters.
Resident name or other information. Maximum length: 32 characters.
Telephone number associated to the resident. Maximum length: 16
numeric characters.
Short description of the resident.
Proximity key codes associated with the user (up to three key codes per
user). The code must be unique in the plant. It is possible to choose
between 4 different types of key according to the device set to read the
key.
Door opener numerical code associated to the user; the configurator
automatically generates a 4-digit code, which can be modified. The code
must be univocal in the system.
If selected, access to all access points (on the topological path of the
relevant apartments and not) is not allowed with either the key code or
the door code.
If selected, the name will be shown in the Call Module. Otherwise, the
name will not be shown in the address book.
Table 14: resident fields
System parameters.
MT124-032N