urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 106

The green section shows schematically the condition of all the devices connected to the system. The
example in question shows that:
•
the number of devices connected to the system ("Involved devices") is 6;
•
the number of devices not in configuration is 6.
The configuration status is not aligned (red section), as explained above.
To apply the previously created configuration to the devices of the system, it is necessary to press the
"Apply Changes" button.
The following pop-up window appears:
This window only is useful to remind the installer that a project must be associated with only one site
and cannot be associated with other sites, as this could cause malfunctions on the systems themselves.
Therefore, projects with the same "plant ID" must not be associated with different sites.
106
Figure 74: pop up window after pressing the "Apply changes" button
MT124-032N