urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 743

APPENDIX M1: Streaming video from IPerCom calling stations to NVR
Urmet
The following procedure describes how to display and record the following on Urmet 1098/324P-326P-
328P NVR devices:
•
streaming video during calls from IPerCom calling stations to apartments or to a generic apartment
station;
•
streaming video during auto-on with mono- and bi-directional audio from apartment station or
CallMe application to IPerCom calling stations.
About Urmet NVR devices, only the information necessary to view and record the streaming video of
the IPerCom calling station is reported; for more detailed information on Urmet NVR devices,
download the
The procedures below refer to accessing the web interface of the Urmet NVR device via IP address. If
access is done via the OSD menu (with HDMI cable and USB port for the mouse), we recommend
consulting the relevant
The procedures below refer to a not configured Urmet NVR device. In case of a device already
configured, some points can be skipped.
Software requirements
On Urmet NVR devices the software version must be V8.2.4.1-20240515 or higher.
MT124-032M
relevant booklet.
booklet, as the procedures may be slightly different.
743