urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 612

In the RTSP streaming settings to set the IP address it is recommended to follow what is reported in
APPENDIX F1: How to use customized network settings in IperCom
It is possible to configure any Urmet NVR device to record calls made via Entry Panel 1060/22 and
related auto-on activated by video door phone. In
calling stations to NVR Urmet
shown. For the configurations of the other Urmet NVR devices contact the Urmet Service Centre.
The "Add" button in the "Activations" section has already been described in paragraph Activations.
612
APPENDIX M1: Streaming video from IPerCom
the configuration procedure of the 1098/328P Urmet NVR device is
system.
MT124-032N