urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 489

The "New" button allows you to select the IPerCom version for which you want to create the new
configuration (depending on the previously installed configurator versions). Then, in relation to the above,
by pressing the "New" button, the following screen is displayed:
Figure 618: choice of the configurator version to start
After selecting one of the proposed versions, the previously installed configurator for the selected IPerCom
version is launched.
For example, by pressing the button 2.1.0 this screen is displayed (like the one shown for the MAX video
door phone):
Figure 619: start configurator version 2.1.0
MT124-032N 489