urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 516

8.6 Securing the system
Once the system configuration has been completed and distributed to all the devices, i.e. while the system
is running, it is possible to secure the system by setting an administrator password in addition to the
installer password. In practice this means that the installer can only make changes to the configuration and
the system by requesting the administrator password. On the other hand the administrator cannot change
the configuration to the system as he/she does not know the installer password. Therefore, the system has
a double security level.
The administrator password can be entered from the configuration menu by selecting "System
configuration", then "Password management" and then "Lock System" items.
The following screen will be displayed:
Figure 649: Administrator password setting
Once the password is entered, you will have to wait for the distribution of the administrator password to all
the devices of the system: you can monitor the distribution status in the dialog box shown below.
Figure 650: Password distribution status
516 MT124-032N