urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 236

To create the new contact, press the "Add new contact" button. The following page is displayed:
The following shows the meanings of the four fields:
Name
Scope
Target
Visibility Filter
236
Figure 263: New contact creation screen
Name of contact
Scope of the contact.
This shows the node in which you are creating the contact; if the
topological node is different from the apartment, you can establish
whether the contact should be public or private (it is public by
default).
Who should be contacted. It can be a device or a set of devices
positioned on a topological node.
Selectable list of device types that should use contact. The list
varies depending on the type of target and is displayed only after
defining the target.
The complete list includes the following items:
- "Video door phone with address book (VDP)",
- "Call Modules (CM)",
- "Door Phone by mean of button T1 (DP1)",
- "Door Phone by mean of button T2 (DP2)",
- "Door Phone by mean of button T3 (DP3)",
- "CallMe (CallMe)",
- "IPerTalk (IPerTalk)".
Table 9: Meaningful fields for creating a contact
MT124-032N