urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 171

Each event category can be further filtered in the Advanced Filters section, which can be enabled by
pressing the "Configure" item, as shown in the figure:
Figure 173: advanced System Logs filters
The next screen contains a drop-down menu with the various categories of events and, depending on the
type of event selected, the relevant filter, as explained in more detail below.
6.15.5.2 Filter on Calls event
If, in the Category drop-down menu, the event type "Calls" (default setting) is selected, the following is
displayed:
Figure 174: advanced filter for calls event
Calls can be filtered according to the calling device ("Source") and the called device ("Destination").
The source and destination are selected by pressing the button .
MT124-032N 171