urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 422

As a final step, press the button
homepage of the master video door phone at the top right, as shown below:
On any slave video door phones, it is possible to display the operating icon in "Remote" mode in the
same way as seen for the master video door phone.
If operation in "Remote" mode has already been activated and deactivated previously on the video
door phone, the relevant icon must be activated manually: it is necessary (only on the master video
door phone) with the screen off, press and hold down the icon
to set the "Remote" mode.
At this point the configuration of the call forwarding service is finished and the CallMe app is ready for use.
The main features of the CallMe app are listed below:
•
call forwarding to the apartment on smartphone/tablet (video door phone must be set in
"remote" mode;
•
auto-insertion on calling stations;
•
intercom call to apartment stations;
•
sending activation commands;
•
door and gate opening even outside of the call.
Auto-insertion on RTSP cameras is not supported by CallMe app.
422
and then the button
Figure 523: operating icon in "Remote" mode
and check that the icon
for at least 5s and use the button
appears on the
MT124-032N