urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 135

6.15.1.5 CallMe Manager support enabled with or without IPerCloud apartments
In IPerCom systems without IPerCloud apartments, the use of the CallMe Manager application is optional
and is recommended for those medium/large home topologies where the figure of the building manager is
required. In this case the application is used to generate the QR code, which the building manager will send
via email to the end user: the latter, by scanning the QR code via the CallMe app, will be able to activate
the call forwarding function on their smartphone/tablet. If, however, the IPerCom system is in IPerCloud
mode, the use of the application is mandatory to associate the license with the apartment and therefore
generate the QR code to activate the call forwarding function on the end user's smartphone/tablet.
To enable or disable CallMe Manager support, see the
to the configurator.
To use the CallMe Manager application you must first authenticate to Urmet Cloud. If this is not the
case, IPerCom Installer Tools reports the anomaly with an error during configuration distribution.
If the IPerCom system is not in IPerCloud mode but the use of the CallMe Manager application is required,
the "Urmet Cloud" tab appears as shown below:
Figure 113: access to the Urmet cloud carried out with CallMe Manager support enabled and no IPerCloud node
The Urmet Cloud section does not show any changes.
The IPerCloud Management section (blue box) shows the indication "The site does not use IPerCloud": this
means that no IPerCloud apartment has been detected.
MT124-032N
Call Forwarding Settings paragraph relating
135