urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 200

Export
The tab allows you to:
•
export a file in html format that contains a summary of the topology and the devices that make up
the system;
•
export a file in xml format useful for the integration of the IPerCom system with the IPassan access
control system (for further details see
About the summary in html format of the system, it is possible to:
•
choose whether to export information about nodes or devices in the system or both;
•
choose from which node to export the above information.
•
sort the devices by MAC address or topological address.
For each node, the name, the type (if site node, block or other), the topological code and whether it is a
2Voice node is shown; in case of 2Voice apartment, the configuration of the dip-switches is also shown (for
further details see paragraph
For each device, the MAC address, the device type, the name, and the topological node where it has been
added is shown (for further details see paragraph
The installer can use the "Change" button in "Project" field of the "Details" tabs to change the system
model. Press the button to open a dialogue box in which you can select the desired new model.
If you go from a simpler model to a more complex one (e.g., from a "Villa Kit" model to a "Multiple Stairs"
model), conversion is immediate and no further intervention by the user is required. If you go from a more
complex system model to a simpler one (e.g., from a "Multi Block" model a "Single Stair" model), you may
need to remove the typological nodes in excess and shift the devices.
200
"APPENDIX O: IPassan integration with
"Adding a Gateway IPerCom-2Voice on a stair
"Adding
Figure 213: Changing the system model
node").
devices").
IPerCom").
MT124-032N