urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 573

End user settings
Show Address Book
Switchboard Button
Infrared
LEDs
Keyboard LEDs
Call Feedback Tone
Button Feedback Tone
Loudspeaker Volume
Welcome Message
MT124-032N
The item appears only if the call addressing mode is "Block
Mode" and if the device is placed on a node other than the
"Site" node. In this case, if the item is selected, the address
book is shown on the call module; if the item is not selected,
the address book does not appear. In the first case it will be
possible to call the apartments via address book and numeric
code, in the second case only via numeric code. Default
value: unchecked.
Enabling of the button for the call to the relevant
Switchboard.
Enabling of user presence detection through integrated
infrared sensor.
Enabling of the camera LED.
Enabling the button backlighting.
Call feedback setting.
Setting of audio feedback on buttons.
Loudspeaker volume setting
It allows to set a welcome message on the calling station
display. Some special characters (e.g. ''emoticons'') may not
be displayed correctly: it is therefore advisable to check that
the message is displayed correctly. Maximum message
length: 64 characters.
Table 35: end user settings
573