urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 295

7.1.5.8.4 Switchboard Activations
Switchboard activations are activation rules that appear only on the Switchboard application, if created on
its topological path. For example, if placed on the unit node, the activations that will be shown on the
Switchboard application are those created from the unit (where the Switchboard application is present),
block or site node.
So once the correct topological node has been chosen, after pressing the "Add new activation" button, the
"Event" drop-down menu will allow you to choose the "Switchboard Activation" item, as shown below:
Figure 344: creation of activation from the switchboard
MT124-032N 295