urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 497

To add the various devices of the system from MAX, VOG
is advisable to follow one of the 4 methods described in the following paragraph, being understood that
7
also from MAX, VOG
valid, i.e.:
•
each device is associated with a topological node through the Add Device button;
•
the Call Module, the Entry panel 1060/21-33-34-71-74-75, the Modular Entry Panel with 1060/48
and the Switchboard cannot be added to an apartment node;
•
the IPerCom-2Voice Gateway and the Lift Interface can only be added to the stair node;
•
the Floor Entry panel can be added only to the apartment node;
•
to access the list of devices, present in each topological node, you need to select the "Topology"
tab: by using the navigation module you must select the desired position, then go to the context
module of the "Devices" tab, where you will find a table showing all the devices installed in the
selected node.
MT124-032N
or Basic video door phone the same rules described for IPerCom Installer Tools are
Figure 628: list of devices attested in a topological node
7
or Basic video door phone in the configuration, it
497