6.15.3 Date/Time
The "Date/Time" tab allows you to:
•
set date and time of the PC on the IPerCom system;
•
obtain the IPerCom system date and time.
6.15.3.1 Configuring date and time from PC
If you want to apply the date and time from PC to the IPerCom system, press the "Set date and time"
button (red arrow):
You are prompted to confirm the operation as shown below:
After pressing the "Yes" button, the date and time are applied to the IPerCom system.
The correct date and time application is indicated by a confirmation message:
MT124-032N
Figure 150: "Date/Time" tab - date/time setting of the PC on the system
Figure 151: confirmation window for date/time alignment operation
Figure 152: date/time alignment successfully performed
157
Need help?
Do you have a question about the IPerCom 3.1.0 and is the answer not in the manual?