urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 131

In the Urmet Cloud section the "Login/Register" button allows you to create an account for registering with
Urmet Cloud or to use one already created previously. If you have never accessed Urmet Cloud, the screen
that appears is the following:
The "CREATE ACCOUNT" button allows you to create a new account (see
paragraph).
If you are not connected to Urmet Cloud it is not possible to configure IPerCom systems in IPerCloud
mode.
If, however, Urmet Cloud has already been accessed at least once and the "Remember me" field is selected,
the above screen appears as shown below:
Figure 109: access to Urmet Cloud at least once with an account already created
After logging in with the "LOGIN" button, the "Urmet Cloud" tab presents an additional section, as
described below.
MT124-032N
Figure 108: access to Urmet Cloud via account creation or login
Urmet Cloud authentication
131