In this manner, the new contact "Dental Practice" will appear in the address book of the MAX video door
phone of apartment "0101010102" and can call it or start a chat with it
.
In the list of contacts, the buttons in the "Edit" and "Delete" columns can be used to edit or delete data for
each contact, respectively (via confirmation pop-up).
If you want to add the dental practice also to the address book of MAX video door phone in the apartment
"0101010103", you need to create the contact directly on floor node "01010101##" as a public type
contact, to display it in the address books of all the apartments of the floor. To do this, open the "Address
books" screen at the floor node and proceed as described above to fill in the "Name", "Target" and
"Visibility Filter" fields.
Figure 268: adding the desired contact on the plan
The "Scope" field, instead, confirms the "PUBLIC" selection so that the contact will appear in the address
books of all MAX video door phones of the nodes which belong to the floor node, i.e. of all the apartments
present on the floor topologic node "01010101##".
If you want to add the "Dental Practice" contact also in address book of MAX video door phone, which is
located on stair "010101####", simply create a new contact in the "Address books" by pointing to the stair
node rather than on the floor node. In this case, if the "PRIVATE" option is selected, in the "Scope" field, the
contact will only be displayed by the MAX video door phone of the stair, while if you select the "PUBLIC"
option, the contact will be also displayed on the address books of the MAX video door phones of the various
floors of the stair.
240
MT124-032N
Need help?
Do you have a question about the IPerCom 3.1.0 and is the answer not in the manual?
Questions and answers