urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 608

Hall Button Settings
Remote Button (#)
Gate settings
Used
Gate Profile (#)
Gate Name (#)
Gate Opening Time (s) (#)
Gate Under Secret (#)
Remote Relay (#)
End user settings
Speakers Volume
Keyboard feedback tone
Call feedback tone
Camera LED
608
It allows you to remotely control the entrance hall button
that opens the main door of the Entry Panel. For further
details, see paragraph
entrance hall button and remote
Table 63: Hall button settings
In this case, the item Yes enables the gate: the following
options are shown, marked with a hash mark (#).
The item No disables the gate.
The item "By door opening" allows you to use the relay
contact of the gate to open the main door.
The Relay Actuator item allows you to use the gate relay
output as the output (only in monostable mode) of a Relay
Actuator: in this case the item marked with the symbol (§)
appears. For further details see the section
used as output of a Relay
Default value: No.
This allows you to associate a previously created door profile
to the concerned gate. In this case, the gate parameters are
automatically compiled (besides the name). Default setting:
Custom (parameters must be compiled manually).
Name to assign to the gate.
Control relay pulse time. Default setting: 3s.
If selected, by pressing the gate button (from an indoor
station) it is possible to activate electric lock of the outdoor
station only when the caller is in conversation or is waiting
for a response. If not selected, the gate can also be opened
outside the call phase from all the apartments where the
topological path detects the outdoor station. Default value:
selected.
It allows you to remotely control the relay that operates the
gate of the Entry panel. For further details, see paragraph
Remote relay functions, remote entrance hall
Table 64: Gate settings
Loudspeaker volume setting.
Sound feedback volume when buttons are pressed.
Call feedback volume.
To enable the lighting LED of the camera.
Table 65: End user settings
Remote relay functions, remote
sensor.
Gate contact
Actuator.
button.
MT124-032N