urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 508

8.3.2.5 Mode 3.1: The installer creates the configuration in the laboratory on the MAX video door
phone/PC/Android tablet and adds at the same time the previously installed devices
Application case: The devices have already been installed, taking note of the topological position
(block/stair/floor/apartment) and of the relevant MAC.
The configuration is created entirely in the laboratory by relying on the notes taken
during the installation (correspondence between device type, MAC address and
topological position).
Pros: It is possible to create the topology in the laboratory on a PC and add devices (of any
type) by manually entering their MAC address.
Cons: There is a risk of making mistakes when:
In this case the installer needs a list containing the following information for each installed device:
▪
the type of device (product model number, e.g. 1060/18);
▪
the MAC address of the device (e.g. 00:1E:E0:00:01:02), reported manually or by applying the label
provided with QR code available on each IPerCom device;
▪
the topological location (e.g. Block 01, Stair 02, Floor 04, Apartment 04).
Then, based on this data, the installer prepares the configuration offline in the laboratory via MAX video
door phone/PC/Android tablet.
The APPENDIX D contains a possible model for this purpose.
1. Configuration creation (topology only) in the laboratory and export to SD card
The installer creates the configuration in the laboratory on the MAX video door phone/PC/Android tablet by
initially setting only the system topology.
2. Addition of devices to the configuration directly in the laboratory, based on the written down
information
With the above information available, it is possible to add each device to the configuration by manually
entering the reported MAC address or, if using an Android tablet, by scanning the QR Code, provided that
the device label has been directly applied to the notes.
508
•
writing down the location of each device (and the relevant MAC), and;
•
when copying the MAC address.
MT124-032N