urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 441

7.1.13 Configuring the call forwarding function in IPerCom systems in IPerCloud mode
The configuration of the call forwarding function in IPerCom system in IPerCloud mode requires the
mandatory use of the following applications to be used in the following order:
•
IPerCom Installer Tools (Windows application) for the installer (registration on Urmet Cloud is
required),
•
CallMe Manager (Windows application) for the installer and building manager (registration on
Urmet Cloud is required),
•
CallMe (Android or iOS smartphone/tablet application) for the end-user (registration on Urmet
Cloud is required).
To configure the call forwarding function with the CallMe Manager app, it is necessary to enable the
relevant item via the IPerCom Installer Tools configurator, the default value of which is disabled (see
paragraph Call Forwarding
Below are the various actions to perform to correctly configure the function.
1. INSTALLER
• Connect a router to the IPerCom system network that can provide Internet access;
• Install the IPerCom Installer Tools PC application;
• Create an Urmet Cloud account via IPerCom Installer Tools and authenticate on IPerCom Installer
Tools with this account;
• Using the IPerCom Installer Tools application, create a system configuration with IPerCloud
apartments and verify that the parameters of the call forwarding function are correct;
• Enable the test mode (from the configurator) and then verify that the call to a test IPerCloud
apartment from any calling station arrives to the CallMe application without pre-activating (and
therefore wasting) any license;
• Disable test mode (from the configurator);
• Pre-activate license bundle;
• Install the CallMe Manager application and authenticate with the same Urmet Cloud account
created before;
• Using the CallMe Manager application, activate the license bundle, assign them to the IPerCloud
apartments and transfer the site to the building manager via invitation sent via e-mail.
MT124-032N
Settings).
441