urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 24

IPerCom system 3.1.0 supports the following services:
o Audio/video communication on calls from calling station to an apartment station and on
intercom calls,
o Opening of the main door and gate from apartment stations during call and conversation
with calling stations,
o Auto-on on all calling stations and RTSP Cameras from all video door phones of the system
(for VOG
APPENDIX W1: RTSP Cameras supported by IPerCom video door
o Access control,
o Addition of 2Voice type columns to the IPerCom system through the 2Voice Gateway
1083/59,
o Display of the system logs (if there is at least one Server 1060/1 in the system) and the
diagnostic through the IPerCom Installer Tools application (both services are available on
the Switchboard even without the presence of a Server 1060/1 in the system),
o Activation of Relay actuator 1060/84 outputs through:
▪
▪
▪
o Calling station gate contact configurable as 1060/84 Relay Actuator output,
o System alarm generation through events on Relay actuator 1060/84 inputs (starting from
firmware version 3.04),
o "User recognition" function, that is the passage of a proximity key or the entering of an
opened door key code associated with a resident or non-resident, in addition to opening
the access point, also activates one or more outputs of a Relay Actuator depending on the
user,
o Remote relay function, remote entrance hall button and remote door open sensor (from
relay actuators with firmware version 4.05),
o Control of one or more lifts through the Lift Interface 1060/37,
o Call divert to another apartment or to the switchboard,
o Centralised firmware upgrade via IPerUpgrade application for Microsoft Windows
(available at www.urmet.com) or via Server 1060/1,
o IPassan advanced access control and IPerTalk systems integration,
o IPerCloud mode integration,
o Floor call button on apartment station configurable as an alarm button,
o Hall button configurable as Switchboard call button,
24
5 5+
and VOG video door phones, see the list of supported RTSP Cameras in
system events,
events on Relay actuator inputs (starting from firmware version 3.04),
scheduling.
phones),
MT124-032N