urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 424

7.1.12.2 Configuring call forwarding function without CallMe Manager application support
The configuration of the call forwarding function without the support of the CallMe Manager app is
foreseen for all those types of systems in which there is no building manager.
Below are the various actions to perform to correctly configure the function.
1. INSTALLER
•
Connect a router to the IPerCom system network that can provide Internet access;
•
Installation of the IPerCom Installer Tools PC application;
•
Using the IPerCom Installer Tools application, create a system configuration and verify that the
parameters of the call forwarding function are correct.
Creating an Urmet Cloud account to authenticate on IPerCom Installer Tools is not mandatory.
2. END-USER
•
Installation of the CallMe application, distributed for Android and iOS operating systems and
downloadable from the relevant stores;
•
Creation of an Urmet Cloud account to authenticate on CallMe;
•
Scan the QR-code present on the video door phones to associate the account with the apartment;
•
Possible sharing of access to the system with other users;
•
Activate the call forwarding function, check its correct activation, check that the apartment's
master video door phone shows the "Remote" mode icon (for further details see the video door
phone user manual available on the website www.urmet.com).
For the 1160/3 door phone the "Remote" mode is already set by default and is not displayed to the
user either via icon or LED.
424 MT124-032N