urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 15

The configuration of the IPerCloud mode requires the mandatory use of the following applications to be
used in the following order:
•
IPerCom Installer Tools (Windows application) for the installer (registration on Urmet Cloud is
required),
•
CallMe Manager (Windows application) for the installer and building manager (registration on
Urmet Cloud is required),
•
CallMe (Android or iOS smartphone/tablet application) for the end-user (registration on Urmet
Cloud is required).
The first two applications are available on the
respective app stores.
Below is the list of actions to be carried out by the installer, building manager and end-user for correct
configuration of an IPerCom system in IPerCloud mode.
INSTALLER
The installer uses the IPerCom Installer Tools application to:
•
create an Urmet Cloud account and authenticate on IPerCom Installer Tools with this account,
•
create a system configuration with IPerCloud apartments,
•
enable the test mode (from the configurator) and then verify that the call to a test IPerCloud
apartment from any calling station reaches the CallMe application without pre-activating (and
therefore wasting) any license,
•
disable the test mode (from the configurator),
•
pre-activate license bundles.
The installer uses the CallMe Manager application (authenticating with the same account as IPerCom
Installer Tools) to:
•
activate the licenses and apply them to the IPerCloud apartments,
•
transfer the property of the site to the building manager via invitation sent via email.
All these features will be explained in detail in the relevant paragraphs.
Creating the configuration in IPerCom systems in IPerCloud mode must be done exclusively by
IPerCom Installer Tools. Any changes must also always be made by IPerCom Installer Tools starting
from the relevant project (see paragraph
of a system).
MT124-032N
www.urmet.com website, the third is available on the
How to use IPerCom Installer Tools for the configuration
15