urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 484

By selecting the desired file name, the configurator will open and show the contents of the chosen
configuration.
If you open a file with ccf extension created through the IPerCom Installer Tools version 3.0.0
configurator and with CallMe Manager support enabled, it is not possible to make any changes to
the configuration except through the same configurator started by IPerCom Installer Tools, as
shown in the following message:
If you want to create a new configuration on SD Card, the configurator will be opened on the screen for the
creation of a new project, as shown in
If the configurator is opened, by changing the current configuration, the "Project" screen will appear as
follows:
Figure 610: "Project" screen of the configurator when changing the current configuration
Two buttons are shown on the left: "Apply", that allows saving and applying the modified configuration to
the entire system, and "Exit", that allows exiting the configurator yet losing the last applied changes.
484
Figure 609: configuration not editable
Figure 605.
MT124-032N