urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 83

The "Storage location" option allows you to choose whether to open the project from your PC (icon
from the Urmet cloud (icon
If you are not logged in to Urmet Cloud, the icon for this opening mode is as follows:
always grey and the "X" means that it is not possible to open the project from the cloud.
6.7.6 Importing a project
To import a project, you need to press the "Import" button. There are 2 import methods and they allow you
to:
•
use the same project on another PC other than the one where it was created and saved,
•
use a project created with old versions of IPerCom Installer Tools on a newer version (the oldest
version allowed is 2.0.0).
The second import mode is useful if, after updating a system, you want to use the project already
created with the previous version of IPerCom.
The 2 import modes are now described in more detail.
6.7.6.1 Use a same project on another PC
To import a project on another PC it is necessary to press the "Import" button. The following screen opens:
Then press the button
MT124-032N
if selected). Opening the project from PC is the default option.
Figure 50: "Import project" window
. A window opens through which you can import .gz files or .sbz files.
) or
. The icon is
83