urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 84

The .gz files are files previously generated on another PC by IPerCom Installer Tools with the "Export"
button, after having opened the project to be exported. The .gz file thus generated must be copied to the
PC where it is to be imported, so that the related project is available in IPerCom Installer Tools.
The import operation (both for .gz and .sbz files) does not open the project directly but makes it available
through the "Open" button.
From the installer's point of view, this operation is equivalent to transferring the project to another
installer.
If a project is exported and then imported to the same PC, this operation returns an error, because a
project with the same name already exists.
project
If a is exported to a PC, then modified on a second PC through IPerCom Installer Tools and
finally you want to import it on IPerCom Installer Tools from the first PC, the operation is possible
only if on IPerCom Installer Tools of the first PC the previously created
In the import operations it is recommended to use IPerCom versions equal to or greater than the
one used in the project export phase.
The .sbz files (server backup zipped files) are files generated via the "System Backup" tab and are backup
files that contain the site configuration. Importing a .sbz file is equivalent to locally importing the site
configuration from which the backup was generated. For further details see the
If you import a project onto another PC, whose configuration has already been applied on a
system, it is absolutely forbidden to transfer the same configuration to another system. The
import function is to be used only to pass a project from one installer to another, assuming that
both installers work on the same system.
84
project
is deleted.
System backup paragraph.
MT124-032N