urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 336

If you want to implement this service on the pedestrian door of a Call Module (for example), it is necessary
to go to the configuration page of the device in question, i.e. open the configurator on the "Topology" tab,
then on the "Devices" tab. A screen with the list of devices present on the system on the selected node is
displayed:
Figure 409: Devices present on the site node
By pressing the modification button on the Call Module, the remote relay function setting part is displayed
in the pedestrian door section, as shown below:
Figure 410: Remote Relay and Remote Sensor sections for the pedestrian door
336 MT124-032N