urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 104

In the system site box, the system status is now available (ONLINE) (red box), as indicated by the relevant
icon . The system ID is zero, since the system does not have a configuration yet: therefore, also the
"Created on" and "Modified" fields are not assigned a value since they are linked to the creation date and
the last modification of the configuration file. The "Connected" field is selected, because the system is
online.
The configuration is not aligned because the modification date of the configuration associated with the
project and that associated with the site are different, that is the project has a modification date while the
plant site still has none (blue boxes).
The other fields contain the following information:
"Mode": " Server-managed" or "Serverless", depending on whether the system is with or without a Server;
"Server IP": IP address of the Server (if any);
"Security Status": "Unlocked" or "Blocked", depending on whether the system is blocked or unlocked;
"Connected devices": indicates the number of all devices connected to the system (present and not present
in the configuration).
6.9.7 How to set date and time on the system
Before transferring the configuration to the system, it is necessary to correctly configure the date and time
on the system. To do this, press the "Date/Time" tab. The screen displayed is as follows:
Figure 71: "Date/Time" tab
104 MT124-032N