urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 97

The following screen appears:
Figure 63: backup of a project
The date and time in which the project backup is being created is highlighted (red arrow) and, if necessary,
an identifying note can be associated with the same backup: in this way the installer creates a restore point
of his project which he can access at any time if the changes made are no longer necessary.
The location in which the backup is saved cannot be changed, in the sense that if the original project was
saved on your PC, all the various backups will be saved on your PC, on the contrary if the original project
was saved on Urmet Cloud, all the various backups will be saved on Urmet Cloud.
After entering any notes and pressing the "OK" button, the correct outcome of the operation is confirmed
by the following dialog box:
Figure 64: backup saved successfully
After making a backup copy, you can make the required changes to the current project and save with the
"Save" button. The "Close site" button allows you to close the site you are working on without closing the
IPerCom Installer Tools application.
MT124-032N 97