urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 62

If the firmware versions of the various devices all coincide with those of an officially released version
(''3.0.0'' in this case), the system is aligned with an officially released IPerCom version. When the "OK"
button is pressed, the following screen is displayed:
Figure 17: auto-detected version 3.0.0
This means that a version 3.0.0 of IPerCom has been detected (referred to the above example) and
therefore the version of IPerCom Installer Tools to use is 3.0.0 version; if the "OK" button is pressed, the
corresponding version of IPerCom Installer Tools is launched:
Figure 18: start screen page of IPerCom Installer Tools version 3.0.0
The operation of this user interface will be explained in detail in paragraph "First run of IPerCom Installer
Tools".
62 MT124-032N