urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 203

7.1.1.3 Multiple Stairs systems
If the system topology consists of several stairs within the same block, a Multiple Stairs configuration can
be created.
In this case a block is automatically created with one stair, one floor and a single apartment.
Figure 217: "Topology" tab for Multiple Stairs system
If you need to add or remove stairs/floors/apartments, you can do it in subsequent steps using the relevant
button at the bottom of the navigation module.
Figure 218: Adding of new stairs to the topology
MT124-032N 203