urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 127

To complete remote access, only the installer password must be entered.
The "System id" field is already filled in and cannot be changed and is the same as the system id of
the project previously opened.
If the installer password entered is incorrect, the following error message appears:
After pressing the "OK" button (and after entering the administrator password if the system is locked), a
window like the one below appears:
As you can see in the red box, the system identifier and that of the project are the same and the connection
to the system is a remote connection (blue box).
The configuration may be aligned or misaligned: in the latter case it is advisable to align it with that
of the remote system or the project, after which any changes can be made to the project and then
remotely transferred to the system.
MT124-032N
Figure 104: error message in case of incorrect installer password
Figure 105: remote access done
127