C
1
ASE
The misalignment is not reported by the configured video door phones already present on the system: this
is to avoid compromising the functioning of the system itself. If the device connected and not updated to
the same IPerCom version of the system is a video intercom, this signals the misalignment with the rest of
the system, as shown below:
Figure 661: misalignment signalling on video door phone not present in the system configuration
Press the "Status" button to display the list of devices and/or software applications whose software
development (UPTK) version (8.26) is not aligned with that of the local device (8.22) (in this case MAX,
7
VOG
or Basic video door phone):
Figure 662: list of devices not aligned with the video door phone added to the system
The above list can list a maximum of 10 devices.
MT124-032N
525
Need help?
Do you have a question about the IPerCom 3.1.0 and is the answer not in the manual?