urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 567

There are two types of electric locks on the market: with automatic rearm or without automatic
rearm.
Installing a type of lock with automatic rearm and sending a door opening command, the door
remains open only for the time established in the configurator ("Door Time (s)" parameter). After
that time the lock rearms and the door is closed. In this case the option "The lock closes after the
door opening time" must be chosen. In this context mounting a sensor on the door, a door left open
alarm will be sent to the video door phones and switchboards only if the door remains opened
(sensor) beyond the time set on configurator ("Max door opening time (s)" parameter).
On the other hand, installing a type of lock without automatic rearm and sending a door opening
command, the door remains open until the door is opened and closed again. In this case the option
"The lock remains open until the door is opened and closed" must be chosen. In this situation, by
installing a sensor on the door, a door open alarm will be sent to the video door phones and
switchboard if, after the door open command has been given, the door is not opened and closed
within the time set on the configurator ("Max door opening time (s)" parameter).
The above also applies to the other calling stations that have this option.
In the RTSP streaming settings to set the IP address it is recommended to follow what is reported in
APPENDIX F1: How to use customized network settings in IperCom
It is possible to configure any Urmet NVR device to record calls made via Call Module 1060/12-13-
17-18 and related auto-on activated by video door phone. In
IPerCom calling stations to NVR Urmet
device is shown. For the configurations of the other Urmet NVR devices contact the Urmet Service
Centre.
The "Add" button in the "Activations" section has already been described in paragraph Activations.
The "Select" button in the "Images" section allows loading a welcome image on the calling station display.
Supported file formats include the most common ones like jpg, bmp and png. We recommend uploading
images with an aspect ratio of 200x58 pixels: this way the image will not be cropped. Once an image is
uploaded, you can delete it using the "Delete" button.
The welcome image disappears if an apartment is called for which (in the configurator) a help
image on how to reach it has been uploaded (see section
replaced by the welcome image during the call phase (forwarding and answering). At the end of the
call, the welcome image is displayed again.
The address book of the Call Module is automatically created by importing the residents (set as
visible) of all apartments in the topology group of the Call Module itself.
MT124-032N
APPENDIX M1: Streaming video from
the configuration procedure of the 1098/328P Urmet NVR
Call addressing
system.
mode). This image is only
567