urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 373

For the meaning of the various parameters, see "APPENDIX A: Configuration parameters of IPerCom
devices". An example of configuration is shown below:
Figure 470: Setting parameters for an access
Press "OK" to create the access profile:
Figure 471: Creating an access profile
Once the access profile has been created, it can be applied to several doors. For example, if there are two
Key Readers in the system that must give access to a swimming pool during the summer with the opening
profile filled in above, you must load the newly created Key Reader in the "Door Profile" item.
MT124-032N 373