urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 769

APPENDIX O: IPassan integration with IPerCom
The integration of the IPassan system with the IPerCom system is carried out as follows.
Use the configurator to:
•
create the topological structure of the system (blocks, stairs, floors and apartments);
•
add the calling stations and enable the respective passages (pedestrian door and/or driveway gate);
•
add any switchboards;
•
add the IPassan Controller devices in the predetermined topological nodes (site node, block node
or other);
•
select the "Lift Control" option in the configuration page if you want the IPassan Controller to also
manage the lift interfaces of the system.
The IPassan Controller acts on all passages within its topological group.
At this point, in the IPerCom Installer Tools configurator, go to the "Project" tab, then to the "Export" tab:
Corresponding to the label "Export for IPassan", press the "Export" button: an xml file is generated.
The saved xml file must then be imported via the IPassan Manager application. The integration can then be
completed by adding users, access profiles and other useful to manage advanced access control.
MT124-032M 769