urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 660

Then it is necessary to press the OK button: the modifications to the site are automatically saved and
IPerCom Installer Tools restarts, showing the following screen:
Figure 787: iPerCom Installer Tools screen after restart
Now it is necessary to open the project associated with the system and connect to it. When you press the
"Connect" button, IPerCom Installer Tools detects that the network settings of the system are no longer
consistent with those of the network card of the PC connected to the system. As a result, the following
window is displayed, which shows a list of the network parameters that must be changed to allow a correct
connection to the system:
Figure 788: invalid network parameters
660 MT124-032N