urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 464

In this way the installer can make changes to the configuration via IPerCom Installer Tools but cannot apply
them to the system. If the installer authenticates on Urmet Cloud via IPerCom Installer Tools, the "Urmet
Cloud" tab shows the information that he has been suspended from making changes to the system, as
shown below:
Figure 582: temporary installer suspension displayed in IPerCom Installer Tools
Once suspended, the building manager can re-enable the same installer via the "Restore installer access"
button: a specific dialog box notifies the building manager regarding the correct outcome of the operation.
2. R
EPLACE INSTALLER
The "Replace installer" button allows the building manager to replace the installer of the system via an
invitation sent via email. The procedure is the same as for transferring a site from installer to building
manager: the building manager sends an invitation to the new installer via email, the installer accepts the
invitation by pressing on a specific link contained in the same email, the building manager receives an email
notification that the installer has accepted the invitation. If the old installer authenticates on Urmet Cloud
via IPerCom Installer Tools, the "Urmet Cloud" tab shows the information that he is no longer authorized to
make changes to the system, as shown below:
Figure 583: installer replacement displayed in IPerCom Installer Tools
464 MT124-032N