urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 530

9 Integration with the iPerTAlk system
IPerCom allows the integration of the iPerTAlk system PBXs Ref. 1375/10-11-12-13 and Ref. 1375/10A-11A-
12A-13A. This integration is useful for the following video door phone features:
•
Audio or audio-video calls from Ipercom calling stations to iPerTAlk extensions;
•
Audio or audio-video calls from Ipercom apartment stations to iPerTAlk extensions;
•
Audio or audio-video calls from iPerTAlk extensions to Ipercom Switchboard and vice versa;
•
Door and gate opening from iPerTAlk extensions;
•
Auto-on function from iPerTAlk extensions to Ipercom calling stations;
•
Auto-on function from Ipercom apartment stations to iPerTAlk calling stations;
•
Auto-on function from Ipercom apartment stations to iPerTAlk RTSP cameras;
•
Audio or audio-video calls from iPerTAlk extensions to IPerCom apartments or single IPerCom
apartment stations (any CallMe application associated with the apartment also rings);
•
Sending activation commands from iPerTAlk extensions to IPerCom Relay Actuators (only during
conversation).
Integration with the IPerCom 3.1.0 system is only supported by iPerTAlk version 2.2.10 or higher.
Two integration modes are possible:
•
with iPerTAlk switch Ref. 1375/701 in presence of an internal network in the iPerTAlk system and
you want to separate the network where iPerTAlk is installed from the IPerCom network;
•
without iPerTAlk switch Ref. 1375/701 when using iPerTAlk as gateway to VoIp phones on the
Ipercom network.
The 2 integration modes are described below.
530 MT124-032N