urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 446

Press button "Scanning the QR code" to run app QR code reader.
Then press the "IPerCloud Test QR Code" button displayed on IPerCom Installer Tools. The following
window appears:
Figure 551: scan the test mode QR Code
Then scan the QR code displayed on the PC where the IPerCom Installer Tools application is installed.
After scanning the QR code, the following screen appears on smartphone/tablet of the installer to indicate
that the place has been added correctly:
Figure 552: place added
446 MT124-032N