urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 640

The following table shows the meaning of the fields for RTSP Camera (NVR).
General Settings
Name
Identifier
Device Code
Location
Streaming URI
IP Address
Port
Stream
Username
Password
For the use of RTSP Cameras with Urmet NVR devices 1098/324P-326P-328P, refer to
Cameras with NVR Urmet device.
640
Meaningful name to be assigned to the RTSP Camera connected to the
Urmet NVR device
Unique identifier of the NVR device (serial number or other)
Non-editable value
Position in the system topology: it is possible to move the device to
another topological node by pressing the "Move" button.
Full URI of the streaming video. Non-editable value. It is built
automatically by filling in the fields below respecting the following
syntax:
rtsp://[<username>:<password>@] <IP Address>:<port>/<stream>
The part in square brackets may not be present if the username and
password are not defined
NVR Urmet device IP address (depends on your network configuration)
Port through which the Urmet NVR device performs RTSP streaming
(variable depending on the Urmet NVR device)
Streaming channel (variable depending on the Urmet NVR device)
Username for accessing the Urmet NVR device
Password for accessing the Urmet NVR device
Table 91: general settings for RTSP Camera (NVR)
APPENDIX M2: RTSP
MT124-032N