urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 556

10.9 Factory reset of the lift interface 1060/37
Figure 701: Lift interface 1060/37
To perform the factory reset of the lift interface, press the Reset button for 5 times in a row (with intervals
of less than 1s). The device resets to factory parameters and loses all the configurations made. The same
button briefly pressed 1 time reboots the device hardware. For more details, refer to the installation
manual of the device available at www.urmet.com.
556 MT124-032N