urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 56

On IPerCom Installer Tools in the "Site" tab, it is possible to check the alignment status between the
configuration relating to a project and the configuration present on the site (plant), highlighting the
following possible situations:
•
site configuration aligned with that present in the project (same date and time);
•
site configuration older than that present in the project;
•
site configuration newer than the one present in the project.
The IPerCom Installer Tools application represents a significant evolution of the previous versions 1.1.0,
1.2.0, 1.3.0 and 1.4.0. The manuals of these versions can be downloaded from the website
www.urmet.com in the relevant sections of IPerCom. This manual will only describe the operation of
version 3.0.0 with all its functions, new and inherited from previous.
6.2 IPerCom Installer Tools: functions
All the main functions of the IPerCom Installer Tools application are described below:
•
automatically update to the latest version available (if there is an Internet connection);
•
detect the version of IPerCom installed on a system;
•
select which version of IPerCom you want to work with when starting the application and then
automatically start the compatible version of IPerCom Installer Tools;
•
create a project to be associated with a system (site);
•
save and edit a project;
•
import a project from PC and export a project to PC;
•
set the time of an IPerCom system or retrieve its time;
•
distribute the configuration associated with a project to the system;
•
lock or unlock an IPerCom system;
•
view the system diagnostics, that is view if all the devices are aligned with the same version of
IPerCom, if they are correctly connected to the system and if the configuration is aligned across the
entire system;
•
view the event history, for example list of calls, access to gates, alarms (this function is only
available if there is at least one 1060/1 Server in the system);
•
carry out a backup of the system configuration directly on your PC or in automatic mode on a USB
stick connected to the 1060/1 Server (the performance of the backup on the PC is in any case linked
to the presence of a 1060/1 Server in the system);
•
import a project to a higher IPerCom version (import is possible for projects created starting from
IPerCom 2.0.0);
56 MT124-032N